CHEVY BOWTIE EMBLEM Universal Overlay Kit, DIY, with (1) Extra Free Overlay Sheet (3M Carbon Fiber)

(2) TWO 11”W x 5”H
Universal Overlay Kit, DIY for for CHEVY BOWTIE EMBLEMS  
Cut-Your-Own Decal for Chevy Bowtie Grill or Rear Emblem
3M Vinyl Overlay Sheets, Carbon Fiber

Goes over existing Chevy Vehicle Bowtie Emblems.  

Will Fit:

  • Silverado Heavy Duty Truck
  • Silverado S10 Work Truck
  • Colorado Heavy Duty HD 1500 2500 3500
  • Spark 
  • Sonic
  • Aveo
  • Impala
  • Malibu
  • Cruze
  • Captiva
  • Equinox
  • Avalanche
  • Suburban
  • Tahoe
  • Cobalt
  • Cavalier
  • Camaro
  • Van
  • SUV 

We include an extra sheet for FREE. Allowing for any mistakes, or use the extra sheet for another emblem, your door handles, cell phone, wheel center emblem, etc.

Purchase Includes:

(2) TWO 11”W x 5”H sheets of 3M Auto Wrap Vinyl, big enough to fit even the largest Chevy truck emblems.

About The Vinyl:

  • Carbon Fiber film (3.5 mils thick)
  • 3M 2080 vinyl has a durability rating of up to five - seven (5-7) years
  • Film is made with Comply micro-channels to allow air to escape easily. 
  • Commercial vehicle and fleet emblem or striping. 

    The vinyl can be removed at any time with no damage to the vehicle. It also protects the emblem from harmful UV rays and rock chips. 

    Lasts up to 8 years on your vehicle and is ready to use right out of the package!

    This large sheet size is idea for Do It Yourselfer’s.

    100% Satisfaction Guaranteed

    Tools Needed and NOT Included: 

    1. Bladed Utility Knife or Razor Blade 

    2. Plastic Squeegee or Plastic Card

     

    How to Install:

    1. Thoroughly clean the surface (isopropyl alcohol is best).

    2. When dry, peel the paper backing from the vinyl sheet and apply.

    3. Once vinyl is applied, you can use heat to activate the adhesive (a heat gun or hair dryer and softly press the film into place with a rubber squeegee or by hand)

    4. Take a sharp utility blade or razor blade and carefully cut vinyl to shape and peel excess away.

    Helpful Tips:

    • Apply in temperature that is 50 degrees or more

    • Do not apply in direct sunlight

    • Allow the vinyl 24-48 hours to adhere (preferably in direct sunlight)

     

    You'd like the emblem overlay kit in a color not listed contact us

    For a custom order contact us

    To order in bulk contact us

     




    Related Items


    Rated /5 based on customer reviews