CHEVY BOWTIE EMBLEM Universal Overlay Kit, DIY - 3M 1080 EXTRA SHEET
Goes over existing Chevy Vehicle Bowtie Emblems.
- Silverado Heavy Duty Truck
- Silverado S10 Work Truck
- Colorado Heavy Duty HD 1500 2500 3500
We include an extra sheet for FREE. Allowing for any mistakes, or use the extra sheet for another emblem, your door handles, cell phone, wheel center emblem, etc.
(2) TWO 11”W x 5”H sheets of 3M Auto Wrap Vinyl, big enough to fit even the largest Chevy truck emblems.
About The Vinyl:
- Rated Both Outdoor and Marine
- Water and UV resistant
- Air-Egress Technology - Bubble Free Air Channel
- No-Mess adhesive for easier application and simpler removal.
- 3 mil thick
The vinyl can be removed at any time with no damage to the vehicle. It also protects the emblem from harmful UV rays and rock chips.
Lasts up to 8 years on your vehicle and is ready to use right out of the package!
This large sheet size is idea for Do It Yourselfer’s.
100% Satisfaction Guaranteed
Tools Needed and NOT Included:
Bladed Utility Knife or Razor Blade
Plastic Squeegee or Plastic Card
How to Install:
Thoroughly clean the surface (isopropyl alcohol is best).
When dry, peel the paper backing from the vinyl sheet and apply.
Once vinyl is applied, you can use heat to activate the adhesive (a heat gun or hair dryer and softly press the film into place with a rubber squeegee or by hand)
Take a sharp utility blade or razor blade and carefully cut vinyl to shape and peel excess away.
Apply in temperature that is 50 degrees or more
Do not apply in direct sunlight
Allow the vinyl 24-48 hours to adhere (preferably in direct sunlight)