Chevy Bowtie Universal Emblem Overlay Kit || with (1) Extra Free Overlay Sheet || (751 vinyl)

(2) TWO 11”W x 5”H vinyl overlay sheets
Universal Overlay Kit, DIY for for CHEVY BOWTIE EMBLEMS                                                
Cut-Your-Own Decal for Chevy Bowtie Grill or Rear Emblem || Goes over existing Chevy Vehicle Bowtie Emblems.                                                                                                 

Will Fit:

  • Silverado Heavy Duty Truck
  • Silverado S10 Work Truck
  • Colorado Heavy Duty HD 1500 2500 3500
  • Spark 
  • Sonic
  • Aveo
  • Impala
  • Malibu
  • Cruze
  • Captiva
  • Equinox
  • Avalanche
  • Suburban
  • Tahoe
  • Cobalt
  • Cavalier
  • Camaro 
  • Van
  • SUV 

We include an extra sheet for FREE. Allowing for any mistakes, or use the extra sheet for another emblem, your door handles, cell phone, wheel center emblem, etc.

Purchase Includes:

(2) TWO 11”W x 5”H sheets of Oracal 751 Auto Wrap Vinyl, big enough to fit even the largest Chevy truck emblems.

About The Vinyl:

  • High cast performance film (2 mils thick).
  • 751 vinyl has a durability rating of up to eight (8) years
  • This film is perfectly suited for lettering, vehicle decals and decoration with high requirements for durability and conformability.

    The vinyl can be removed at any time with no damage to the vehicle. It also protects the emblem from harmful UV rays and rock chips. 

    Lasts up to 8 years on your vehicle and is ready to use right out of the package!

    This large sheet size is idea for Do It Yourselfer’s.

    100% Satisfaction Guaranteed

    Tools Needed and NOT Included: 

    1. Bladed Utility Knife or Razor Blade 

    2. Plastic Squeegee or Plastic Card


    How to Install:

    1. Thoroughly clean the surface (isopropyl alcohol is best).

    2. When dry, peel the paper backing from the vinyl sheet and apply.

    3. Once vinyl is applied, you can use heat to activate the adhesive (a heat gun or hair dryer and softly press the film into place with a rubber squeegee or by hand)

    4. Take a sharp utility blade or razor blade and carefully cut vinyl to shape and peel excess away.

    Helpful Tips:

    • Apply in temperature that is 50 degrees or more

    • Do not apply in direct sunlight

    • Allow the vinyl 24-48 hours to adhere (preferably in direct sunlight)

    Related Items

    Rated /5 based on customer reviews