Before You Start Clean Your Application Surface First Store Front Application Instructions APPLICATION INSTRUCTIONS Line Up the Decal Where You Would Like It Placed.
Then Place Tape Down The Middle (on the whole decal (both the wax paper backing and the clear transfer tape). Remove The Clear Transfer Tape Away From The Wax Paper Backing. The Decal Should Stick To The Clear Transfer Tape.
Then Cut Away The Exposed Wax Paper Backing - Decal On One Side Of The Hinge.
Then From The Hinge (middle center working to the end) Start Pressing The Decal To The Application Surface Area.
Use A straight Edge To Smooth The Decal To The Surface Complete The Same Steps For The Other Side Of the Decal
Carefully Remove The Transfrer Tape From The Applied Decal, Leaving Your New Decal On Your Application Surface.