Chevy Bowtie Emblem Overlay Kit Application Instructions

Kit is Compatible With: 
  • Silverado Heavy Duty Truck
  • Silverado S10 Work Truck
  • Colorado Heavy Duty HD 1500 2500 3500
  • Spark 
  • Sonic
  • Aveo
  • Impala
  • Malibu
  • Cruze
  • Captiva
  • Equinox
  • Avalanche
  • Suburban
  • Tahoe
  • Cobalt
  • Cavalier
  • Camaro
How to Install:
  1. Thoroughly clean the surface (isopropyl alcohol is best).
  2. When dry, peel the paper backing from the vinyl sheet and apply.
  3. Once vinyl is applied, you can use heat to activate the adhesive (a heat gun or hair dryer and softly press the film into place with a rubber squeegee or by hand)
  4. Take a sharp utility blade or razor blade and carefully cut vinyl to shape and peel excess away.
The vinyl can be removed at any time with no damage to the vehicle. It also protects the emblem from harmful UV rays and rock chips. 

Helpful Tips:

Apply in temperature that is 50 degrees or more
Do not apply in direct sunlight
Allow the vinyl 24-48 hours to adhere (preferably in direct sunlight)
Chevy Bowtie Emblem Overlay Kit